Edge Timer

How to play

Overview

Edge Timer guides you through a session of repeated edging cycles. Each cycle has three phases: build-up, edging, and rest. Complete all edges to finish the session.

Session Phases

Pre-Edge — A countdown runs. Build up stimulation and press Edge when you reach the edge. Pressing early is fine; a late press adds bonus time to your next edge.
Edging — Hold at the edge for the full duration. The button is locked — you must stay until the timer ends.
Resting — Cool down for the displayed duration. The next cycle starts automatically when rest ends.

Edge Failed

If you go over the edge during the Edging phase, press ⚠ Edge Failed. Penalties are applied based on how much time was left:

Time Remaining	Penalties Applied
< 30s	+5% rest skip chance
30s – 1 min	+5% skip chance, edge max +1 min
1 – 2 min	+10% skip chance, edge +1/+2 min, rest ×0.90
2 – 3 min	+20% skip chance, edge +1/+2 min, rest ×0.80
3 – 4 min	+20% skip chance, edge +2/+2 min, rest ×0.70
4+ min	+40% skip chance, edge +3/+3 min, rest ×0.10, +1 extra edge

Last edge punishment: Failing on the very last edge adds +2 extra punishment edges on top of all other penalties.

Status Panel

Once a session starts, a panel below the progress bar shows all live parameters. Penalty rows dim when inactive and light up in orange when active.

Config

Tap Config (top-left) before starting to adjust ranges, or use Randomize Parameters. Config is locked during a session.

Controls

Pause / Resume — freezes the current timer.
Restart — ends the session and resets all penalties.